Where is my main water shut off valve?
Your main water shut off valve is almost always close to where the water pipe enters your home. In a house with a basement, WSSC Water says it is typically near the front foundation wall, the side facing the street; in a slab house or townhouse, check near the water heater, a utility closet or the garage; in a condo, look for your unit's own valve near the water heater or under the sinks. If your water meter is indoors, the valve sits next to the meter.
Houses with a basement
Stand in the basement on the side of the house closest to the street and follow the wall. The water line usually comes through the foundation there, often within a few feet of the floor, and the valve is on that pipe within a few feet of where it enters. In some homes the pipe runs first to a mechanical room.
In some older homes the line enters through a crawl space, and the valve may be inside the crawl space instead. WSSC Water suggests having a second valve in the basement in that case, so you are not crawling in to reach it in a hurry. If your meter is inside the basement, check the valve right beside it.
Slab houses and townhouses
Without a basement, the pipe often comes up through the floor slab. Look:
- In the closet or room that holds the water heater.
- In the garage, on the wall that faces the street.
- Under the kitchen sink, in some smaller homes.
- In a utility closet near the front of the house.
In many townhouse rows each home has its own valve inside, while the meters may sit together outside. For homes with an outside meter, WSSC Water says there is likely just one inside valve that turns off water to the whole home.
Condos and apartments
In a building, the true main is usually in a locked mechanical room that only building staff can reach. Your unit may still have its own shut off, often near the water heater, behind an access panel, or in a closet. Each sink and toilet also has a small valve of its own.
Ask your building manager to show you which valves control your unit, and learn the after hours number for building staff.
How to turn the two common valve types
- Lever handle (ball valve). It takes only a quarter turn. When the handle lines up with the pipe, water is on. Turn it slowly until the handle sits across the pipe, and the water is off.
- Round wheel handle (gate or globe valve). Turn it clockwise. WSSC Water notes it may take two or more full turns. Older wheel valves can be stiff, so use steady hand pressure and do not hit the handle or force it with a long wrench.
To turn water back on, open the valve slowly, then run a few faucets to push out the air before using appliances. If your home has fire sprinklers, the valve setup is different, and WSSC Water's guide on finding and operating your main valve covers it.
The meter and the curb valve belong to WSSC Water
Many meters in WSSC Water's area sit outside in a covered box near the street or sidewalk; others are indoors. Near the property line there is also a curb valve under a round metal cover. Both are WSSC Water's equipment, and WSSC Water's plumbing code makes it unlawful to tamper with the meter, its seals or the curb valve. Use the valve inside your home.
If water is leaking at the meter box or in the street, call WSSC Water at (301) 206-4002. If your indoor valve will not close, call a licensed plumber. See who is responsible for the water line for where WSSC Water's part ends.
Test the valve once a year
A valve that has not moved in years can stick or start to drip at the stem the first time you need it. Once a year, close it, open a faucet to confirm the water stops, then reopen it slowly. If it will not turn, will not stop the water fully or leaks around the handle afterward, have a licensed plumber replace it on a calm day. Hang a tag on it so anyone in the house can find it. A leak sensor on the floor nearby adds another layer, and Strech, the home operating system, is being built to work with sensors like that.
Questions people ask
Which way do I turn the main water valve to shut it off?
A wheel handle turns clockwise. A lever handle turns a quarter turn until it sits across the pipe.
Can I turn off my water at the meter or the street?
The meter and curb valve are WSSC Water's, and its rules prohibit tampering with them. Use your inside valve, and call WSSC Water if the problem is at the meter or street.
What if I cannot find my main water shut off valve?
Trace the water line back from your water heater to where it enters the home. If you still cannot find it, a plumber can locate it and tag it.
My shut off valve drips after I turned it. Is that normal?
A small drip at the stem is common on older valves. Tighten the packing nut slightly, or have a plumber replace the valve.
Related
Updated November 18, 2026 · Strech Inc., Montgomery County, Maryland